Best PC Case for RTX 5090 Builds in 2026: Top 10 Picks

The RTX 5090 is one of the most thermally demanding GPUs ever released, and the MONTECH TG3 addresses that challenge with a cooling architecture built around volume and airflow throughput. The pre-installed GF360 U unibody side intake and GF120 U rear exhaust fans establish a strong positive-pressure intake path right out of the box, and the case scales to nine total fans if your 5090 demands even more aggressive thermal management. Ventilated panels keep restriction low across the airflow path. The spacious interior accommodates the long PCIe cards typical of flagship GPUs, and back-connect motherboard support for ASUS BTF, MSI Project Zero, and GIGABYTE Project STEALTH platforms means the area directly adjacent to a massive GPU stays clear of cable obstruction. ATX, Micro-ATX, and Mini-ITX compatibility adds flexibility. The tempered glass side panel and ARGB unibody fan system turn that thermal performance into a showcase, making the 5090 itself the visual centerpiece. At 20.83 inches deep by 18.31 inches wide, the footprint is substantial but proportional to what a high-end build of this caliber requires.

Case Type: Mid-Tower ATX
Motherboard Support: ATX, Micro-ATX, Mini-ITX
Back-Connect Compatible: ASUS BTF, MSI Project Zero, GIGABYTE Project STEALTH
Pre-Installed Fans: 1x GF360 U REV side intake, 1x GF120 U rear exhaust
Maximum Fan Support: Up to 9 fans
Dimensions: 20.83"D x 18.31"W x 9.41"H
Color: Black
Special Features: Built-in fans, RGB lighting, cable management, tempered glass panel
Warranty: 1 year
Model Number: TG3B

Best suited for builders pairing an RTX 5090 with a back-connect motherboard platform who want strong out-of-box airflow without sourcing fans separately. Content creators and enthusiasts who plan to push fan counts toward the nine-fan maximum will get the most from this case. Skip it if you rely on 3.5-inch hard drive bays, as none are included, or if you need a compact chassis that minimizes desk footprint.

Fitting an RTX 5090 into a mid-tower demands generous GPU clearance, and the Lian Li V100 delivers with support for graphics cards up to 420mm in length, comfortably accommodating the oversized triple-fan coolers that typically accompany flagship GPUs. Four pre-installed ARGB PWM fans with hydraulic bearings establish a quiet baseline airflow system, and the case expands to nine 120mm fan positions or a 360mm radiator when you want to push cooling further. CPU cooler clearance reaches 178mm, leaving room for large tower coolers that work alongside the 5090 without competing for intake air. The panoramic tempered glass construction on multiple panels transforms a high-end GPU into a centerpiece rather than a component you hide, which is a natural fit for a card at this performance tier. Stainless steel, tempered glass, and plastic construction feels durable. Rear cable routing and a dedicated PSU compartment keep the interior clean, so the RTX 5090 commands full visual attention. Tool-less side panel access makes the swap-heavy iteration typical of enthusiast builds less frustrating. The open showcase design does trade acoustic insulation for visibility, a reasonable compromise for most 5090 builders prioritizing thermal headroom over silence.

Form Factor: Mid-Tower ATX
Motherboard Support: ATX, Micro-ATX, Mini-ITX
GPU Clearance: Up to 420mm
CPU Cooler Height: Up to 178mm
Radiator Support: Top radiator up to 360mm
Fan Configuration: Supports up to nine 120mm fans

Pre-Installed Fans: 4x 120mm PWM ARGB fans
Fan Speed: 1800 RPM max
Airflow: 61.47-60.4 CFM
Air Pressure: 2.54-2.17 mm-H2O
Noise Level: 26.5-30.8 dBA
Bearing Type: Hydraulic

Lighting: Integrated 26-LED ARGB strip with full spectrum color control and daisy-chain connectivity
Materials: Tempered Glass, Stainless Steel, Plastic
Internal Bays: 4
Dust Filters: Yes
Weight: 8200g
Warranty: 1 Year

The Antec C8 Wood is a premium full-tower case designed for enthusiasts building high-end systems that demand both performance and visual impact. This case is engineered for builders working with E-ATX motherboards, multi-GPU setups, or large CPU coolers who refuse to compromise on either thermal performance or aesthetic appeal.

Where the C8 Wood truly excels is its exceptional interior volume and component compatibility. The dual-chamber design creates dedicated zones for optimal airflow while maintaining a clean appearance. Users report seamless fits with massive Threadripper builds, oversized coolers, and even dual graphics cards for AI workloads. The case supports up to three 140mm fans or two 160mm fans on top and bottom, plus 360mm radiators on multiple orientations, giving you complete cooling flexibility.

The design quality stands out immediately upon opening the box. The real exotic wood front panel paired with seamless-edge tempered glass side panels creates an elegant, sophisticated look that complements modern home offices and gaming setups. Panel removal is smooth and intuitive, and the included accessories kit eliminates the need for additional hardware. Cable management is intuitive thanks to the spacious layout, and even complex multi-component builds remain organized.

The primary considerations are the case's substantial size, which requires dedicated space, and the lack of pre-installed fans. However, buyers consistently view the fan-free design as a feature rather than a drawback, since it allows selection of premium cooling solutions tailored to specific performance needs and budgets.

For builders prioritizing a distinctive aesthetic alongside high compatibility and exceptional cooling potential, the Antec C8 Wood delivers in every category. It transforms component selection from a constraint into a showcase opportunity.

Physical Dimensions: 18.26 inches deep, 11.93 inches wide, 18.74 inches tall. Weight: 10.39 kg.

Motherboard Support: Extended ATX, ATX, Micro-ATX, and Mini-ITX compatible. Specifically optimized for E-ATX builds.

Cooling Capacity: Supports 360mm radiators on top, bottom, and side simultaneously. Fan mounting accommodates three 140mm or two 160mm fans. Full-cut bottom with interchangeable 120mm/140mm brackets.

Component Compatibility: GPUs up to 440mm length. Three 3.5-inch hard drive bays. Full cable management infrastructure.

Connectivity: Two USB 3.0 ports and two USB 2.0 ports on front panel.

Materials: Tempered glass side and front panels with exotic wood accents. Durable steel construction throughout.

Warranty: Two-year manufacturer warranty included.

Ideal For: High-end gaming enthusiasts, content creators, AI researchers, and system builders working with E-ATX motherboards or multi-GPU configurations who prioritize both aesthetics and component compatibility.

Perfect Use Cases: Threadripper and high-core-count CPU builds, dual-GPU gaming and rendering setups, large custom water-cooling loops, and showcase PC builds for home office or streaming environments.

Consider Alternatives If: You need a compact case for limited desk space, prefer an all-in-one solution with included fans and RGB lighting, or are building budget-constrained systems where every dollar spent on the case reduces component budget.

Pairing an RTX 5090 with the ASUS A31 starts with one meaningful advantage: the BTF hidden connector system routes all modular cables behind the motherboard, leaving the entire GPU side of the case completely unobstructed. On a card as large and visually striking as the RTX 5090, eliminating foreground cable interference is a genuine build quality upgrade rather than a cosmetic preference. Dual tempered glass panels with a frameless design extend that clean sightline to both sides, and the 8-degree angled base directs ARGB lighting upward so the GPU lighting is more visible and impactful from a normal viewing angle. Thermal support aligns with 5090 requirements: the case accepts 360mm AIO coolers with ample clearance and provides multiple fan mounting positions, so you can balance GPU heat output against CPU cooling demands. Support for ATX, mATX, and ITX motherboards gives flexibility in platform selection. Alloy steel construction keeps the chassis rigid under the weight of a heavy flagship GPU. Users report solid temperatures even with air-only configurations, suggesting the airflow geometry is efficient enough to handle high thermal loads without mandating liquid cooling.

Form Factor: ATX Mid-Tower
Motherboard Support: ATX, Micro-ATX, Mini-ITX
Cooling Support: Up to 360mm AIO coolers with 80mm clearance
GPU Compatibility: RTX 5090/4090 and equivalent length cards
Storage: 2x 3.5-inch HDD bays, multiple SSD mounting locations
Ports: 2x USB 3.0, USB-C ready
Connectivity: BTF hidden connector design with behind-motherboard cable routing
PSU Mounting: Rear mount (ATX standard)
Fans Included: Mounting points for multiple configurations
Materials: Alloy steel frame, tempered glass panels, reinforced plastic components
Dimensions: 17.13 inches deep, 9.37 inches wide, 20.12 inches high
Weight: 18.1 pounds
Features: Dual-sided tempered glass, frameless design, 8-degree angled base, ARGB-ready, easy dust filters
Warranty: 2-year manufacturer coverage

Purpose-built for RTX 5090 builders using BTF-compatible motherboards from ASUS or similar hidden-connector platforms who want the cleanest possible interior presentation. Enthusiasts focused on a frameless dual-glass showcase will find the A31 well matched to that goal. Skip it if you need more than two mechanical hard drives, or if you intend to build without a BTF-compatible motherboard and want additional pre-installed fans included.

The RTX 5090 is a power-hungry, physically imposing card that demands a case built around serious thermal management and flexible component placement. The CORSAIR 4000D RS ARGB meets that challenge with its InfiniRail mounting system, which accommodates dual 360mm radiators and complex multi-fan configurations without compromise. Three pre-installed RS ARGB fans deliver strong airflow straight out of the box, and real-world GPU temperatures as low as 29 degrees Celsius under load speak to how well this case breathes. The 3D Y-Pattern front panel actively channels air toward your most heat-sensitive components. For an RTX 5090 build, the FRAME Modular System is a genuine advantage, letting you swap the motherboard tray for billet aluminum and reconfigure the layout as cooling needs evolve. Alloy steel and aluminum construction keeps the chassis rigid under the weight of a high-end GPU, and thoughtful cable routing with rear SSD mounting and removable interior panels keeps airflow unobstructed. ATX motherboard support rounds out a well-matched platform for flagship GPU builds.

Case Design: Mid-tower ATX modular system with removable panels and customizable frame components
Motherboard Support: ATX, mATX, ITX
Cooling Capacity: Dual 360mm radiators, up to 10 total fans (120mm or 140mm)
Expansion Slots: 7 total slots for expansion cards and GPUs
Storage Bays: 3 internal bays with SSD mounting on motherboard tray rear and HDD mounting on case floor
Power Supply: Rear-mounted, supports up to 1600W
Pre-Installed Fans: 3x CORSAIR RS ARGB PWM with 8 LEDs each, daisy-chainable 4-pin connectors
USB Ports: 3x USB 3.0 ports
Material: Alloy steel and aluminum construction
Dimensions: 19.17" D x 9.41" W x 19.13" H
Weight: 22.7 pounds
Warranty: 2-year manufacturer coverage

Builders pairing an RTX 5090 with a high-end ATX platform who prioritize thermal headroom and long-term adaptability will get the most from this case. The modular system rewards enthusiasts who expect to upgrade cooling hardware over time. Skip it if you are working with a compact desk setup where its large footprint is a problem, or if you are new to PC building and may overlook the pre-installed fan direction requirements.

The NZXT H9 Flow RGB+ is a premium mid-tower ATX case engineered for enthusiasts and content creators who refuse to compromise on cooling, aesthetics, or build experience. Its dual-chamber architecture elegantly separates your components from the power supply and storage drives, creating dedicated airflow paths that keep temperatures in check during intense gaming sessions or heavy workloads.

What sets this case apart is its remarkable out-of-the-box completeness. You get 7 pre-installed RGB fans, an integrated control hub, and a layout so intuitive that even first-time builders report assembly taking mere hours. The perforated steel panels and angled front fans create an airflow design that reviewers consistently praise for keeping high-end hardware cool without excessive fan noise. Support for 420mm radiators and 9 additional fans means you can scale cooling as your ambitions grow.

Visually, the H9 Flow RGB+ delivers showcase-ready presentation. Wraparound tempered glass panels let you appreciate every component from multiple angles, while the seamless black finish with customizable RGB lighting transforms it into a true centerpiece. Rear-connect motherboard compatibility unlocks a completely cable-free aesthetic for those willing to invest in compatible hardware. Cable management is thoughtfully designed with extra-wide channels, built-in Velcro straps, and multiple tie-down points that make routing clean.

The primary consideration is power supply cable requirements. High-end graphics cards paired with the RGB control hub may demand more PCIe connectors than some power supplies provide, though a secondary cable typically costs under $20. Additionally, the case's generous 19-inch width means measuring your desk or workspace beforehand prevents setup disappointment.

Verdict: The NZXT H9 Flow RGB+ justifies its premium price through exceptional cooling performance, refined build experience, and included RGB components that would cost $150+ separately. It is the ideal investment for anyone building a high-performance system who values both thermals and aesthetics.

The dual-chamber design is the case's cooling foundation, segregating hot components like the CPU and GPU from power supply heat. This separation, combined with 7 pre-installed RGB fans and support for up to a 420mm top radiator plus additional front and bottom radiators, creates a multi-layer cooling strategy that adapts to any thermal challenge.

Reviewers consistently report that even under sustained high loads, internal temperatures remain impressively low. The perforated front panels and angled 140mm fans optimize air intake without creating turbulence, while the 120mm rear exhaust efficiently expels hot air. The case supports configurations ranging from simple air cooling to complex liquid cooling setups with multiple radiators and pump blocks.

The H9 Flow RGB+ accommodates full-size ATX motherboards, E-ATX variants, and modern graphics cards up to the flagship tier, including recent RTX 5090 class cards. Internal dimensions provide generous working space, making component installation straightforward and stress-free. Six internal drive bays support both 3.5-inch and 2.5-inch storage configurations.

Rear-connect motherboard compatibility with ASUS BTF and MSI Project Zero unlocks cable-free internals for those seeking ultimate minimalism. The included RGB control hub powers case lighting independently, though it does require a dedicated PCIe power connector from your power supply.

Fitting an RTX 5090 into a case requires space, airflow, and structural support, and the CORSAIR 3500X RS ARGB addresses all three while adding wraparound tempered glass that puts the card on full display. The case accepts EATX boards down to Mini-ITX, so it scales with whatever platform surrounds your GPU. Three pre-installed RS120-R ARGB fans provide immediate airflow, and the interior accommodates large GPU bodies and tower coolers without layout compromises. Radiator support up to 360mm means liquid cooling the RTX 5090 is a straightforward option rather than an afterthought. The GPU anti-sag stabilization arm is particularly relevant here since the 5090 is a heavy card, and having dedicated support built into the case reduces stress on the PCIe slot over time. Magnetic dust filters on the front, side, and top protect components from particulate buildup during long high-load sessions. Compatibility with reverse-connector motherboards including ASUS BTF, MSI Project Zero, and Gigabyte Project Stealth gives this case strong alignment with the clean-build ecosystem that typically surrounds flagship GPU configurations.

This case supports a broad range of motherboard form factors, from Mini-ITX compact builds to Extended ATX high-end platforms. Cooling capacity is impressive with support for up to 10x 120mm fans across side, roof, and PSU mounting points, allowing flexible thermal configurations. The case accommodates radiators up to 360mm, making it suitable for both air and all-in-one liquid cooling solutions.

The CORSAIR 3500X is compatible with the latest reverse-connection motherboards including ASUS BTF, MSI Project Zero, and Gigabyte Project Stealth, enabling cable-free interior builds for an exceptionally clean aesthetic. Storage flexibility includes multiple drive mounting options, though traditional 3.5-inch hard drive bays are limited. Front connectivity includes two USB 3.0 ports plus standard audio connectors for convenient access.

Model: CORSAIR 3500X RS-R ARGB (CC-9011322-WW). Case type: Mid-tower. Supported motherboards: Mini-ITX to Extended ATX. Dimensions: 18.11W x 19.92D x 9.45H inches, weighing 9.02 kg. Material: Tempered glass front and side panels with metal chassis. Power supply: Bottom-mounted. Includes 3x RS120-R ARGB fans with simple +5V motherboard header control.

Cooling capacity: 10x 120mm fan mounting points, supports radiators up to 360mm. Connectivity: 2x USB 3.0 ports. Features include removable glass panels, magnetic dust filters, GPU anti-sag stabilization arm, double-shot cable grommets, and rear cable storage. Warranty: 2-year manufacturer coverage. Best Sellers Rank: #13 in Computer Cases.

The darkFlash LAND451 is a mid-tower ATX case designed primarily for enthusiasts building high-end gaming PCs who want to showcase their components. It excels for builders planning vertical GPU mounting, BTF motherboards, or custom liquid cooling loops who value visual impact alongside functionality.

The standout feature is undoubtedly the 270-degree dual tempered glass panoramic view, which delivers impressive visual presence in any setup. Real-world performance is equally strong, with support for dual 360mm radiators, perforated bottom airflow design, and the ability to mount graphics cards up to 420mm vertically or horizontally. This flexibility ensures compatibility with current and next-generation high-end GPUs while maintaining clean airflow patterns.

Build quality is generally solid, with a spacious interior that never feels cramped during installation and clear glass panels that showcase every detail. The rear cable management system with E-ATX motherboard mounting positions keeps the visible interior pristine. However, some users note that metal panels feel thinner than expected in certain areas, which may affect long-term durability or perceived premium feel.

The main practical drawbacks include limited rear cable routing space when using non-modular power supplies and only one included fan, requiring additional investment for optimal multi-fan setups. The case also ships without a GPU riser cable for vertical mounting, requiring separate purchase.

Overall, the LAND451 represents excellent value for builders seeking a showcase case with strong cooling capabilities and modern features. It delivers on aesthetics and performance while remaining budget-friendly compared to premium branded alternatives, making it ideal for first-time custom builders and experienced enthusiasts alike.

Form Factor and Compatibility: Mid-tower ATX case supporting ATX and M-ATX rear-connector motherboards with E-ATX mounting positions. Dimensions are 17.76 inches deep, 10.16 inches wide, and 19.33 inches high, weighing 11.3 kg.

Cooling and Thermal Management: Supports dual 360mm AIO liquid cooling radiators on top and side panels. Includes 1x INF34 flagship ARGB PWM fan. Perforated bottom design and vertical airflow channels optimize heat dissipation for high-performance systems.

Storage and Connectivity: Features 1 internal bay for storage drives. Front panel includes 1x USB 3.1 Type-C port and 2x USB 3.0 ports for fast data transfer and device connectivity.

GPU Support: Accommodates graphics cards up to 420mm in length with both horizontal and vertical mounting options. Fully compatible with RTX 5090 series and other oversized high-end GPUs. Note that GPU riser cable is not included.

Materials and Design: Constructed from metal frame with dual tempered glass side panels providing 270-degree panoramic visibility. Includes dust filters and integrated RGB lighting support with multiple fan headers.

Who Should Buy This Case: The LAND451 is ideal for custom PC builders planning high-end gaming systems who want to showcase their components. It's perfect for anyone investing in premium GPUs, custom liquid cooling loops, or BTF motherboards. First-time builders will appreciate the spacious interior, while experienced enthusiasts will value the aesthetic and cooling flexibility.

What to Consider Before Purchasing: Plan to budget for additional case fans beyond the included unit if building a high-performance system. If using a non-modular power supply, verify sufficient rear cable space for your specific PSU model. Purchase a GPU riser cable separately if planning vertical GPU mounting. The case is quite large, so ensure your desk or mounting location has adequate space.

Compatibility Checklist: Verify your motherboard is ATX, M-ATX, or E-ATX compatible. Confirm GPU length does not exceed 420mm. Measure available radiator space if planning liquid cooling. Check that your power supply's cable configuration allows proper rear routing. Consider room for additional cooling fans if running demanding workloads.

Value Proposition: At its price point, the LAND451 offers premium features typically found in cases costing significantly more. The combination of panoramic glass, vertical GPU support, and quality cooling capacity makes it exceptional value for showcase builds that don't require premium build materials.

The Cooler Master NR200P V2 is a premium Mini-ITX case designed for enthusiasts who refuse to compromise on performance in a compact build. Built for serious gamers and PC builders targeting high-end configurations like RTX 5090 systems or Ryzen 7000-series CPUs, this 18.25L case proves that small form factor doesn't mean small performance potential.

The standout feature is its exceptional GPU support, accommodating vertical mounting up to 357mm with 3.5 slots of clearance, paired with top-mounted 240/280mm AIO radiator compatibility. Reviewers consistently praise the intuitive internal layout that makes working in tight spaces surprisingly manageable, while the included PCIe 4.0 riser cable eliminates extra purchases. The dual panel system (tempered glass and vented steel) gives builders genuine flexibility between showcase aesthetics and maximum thermals.

Build quality is generally solid with excellent ventilation design and tool-free assembly features like quick-release pins and removable GPU back panels. However, some users reported quality inconsistencies including slightly bent panels and loose-fitting side panels on arrival. The tight internal clearance demands careful component selection, particularly with AIO coolers where pump dimensions matter as much as radiator size.

The main tradeoff is the steep learning curve for ITX first-timers. Assembly requires patience and precise planning, especially when combining large GPUs with 280mm radiators. SFX PSU compatibility is strictly enforced, limiting power supply options compared to standard cases.

Verdict: The NR200P V2 is an excellent choice for experienced builders seeking compact high-performance systems with room for serious cooling. Its smart design, thermal capability, and included cable justify the investment, provided you're willing to invest time in a patient, deliberate build process.

Dimensions: 14.65 inches (D) x 7.28 inches (W) x 11.5 inches (H), weighing 10.9 pounds with an 18.25L total volume.

Motherboard Support: Mini-ITX only (170 x 180mm compatibility), with 3 total expansion slots and support for CPU coolers up to 67mm height.

GPU Support: Vertical mounting design accommodates GPUs up to 357mm length with 3.5 slots of clearance. Includes PCIe 4.0 riser cable.

Cooling: Top-mounted 240/280mm AIO radiator support, 120mm bottom fan included, 525mm tubing recommended for clean front routing. Air cooling method with optimized airflow design.

Power Supply: Strictly SFX PSU only (130mm maximum length). Top-mounted configuration.

Connectivity: 2 USB 2.0 ports, 2 USB 3.0 ports, USB 3.2 Gen 2x2 Type-C port on I/O panel.

Storage: 3 internal bays supporting 3.5-inch form factor hard drives.

Build: Tempered glass side panel plus vented steel panel included. Black finish. 2-year manufacturer warranty.

Who Should Buy This Case? Experienced ITX builders targeting high-performance gaming or workstation builds with modern GPUs and liquid cooling. Best suited for those who value compact desk-friendly form factors and aren't intimidated by tight component clearances.

Component Compatibility Checklist: Verify your AIO cooler dimensions before purchase (280mm radiators vary in width, some exceed 27mm and won't fit). Confirm your SFX PSU is exactly 130mm or shorter. Measure your GPU length and confirm vertical mounting works with your specific card model. CPU coolers must be 67mm or shorter.

Build Tips from Reviews: Take your time with assembly, plan your cable routing before installation, and consider a thermal paste application that allows for a firm GPU bracket fit. The case comes apart easily for troubleshooting, and components install smoothly once you understand the internal layout.

Warranty and Support: Covered by Cooler Master's 2-year manufacturer warranty. Check with Cooler Master support if you receive a unit with bent panels or quality issues on arrival.

The Mechanic Master C+Max is a premium compact gaming case designed for builders who want desktop-class performance without desktop-class size. This case bridges the gap between portability and component compatibility, supporting micro-ATX motherboards, full-size GPUs up to 385mm, and standard ATX power supplies. It's perfect for competitive gamers, LAN party enthusiasts, and builders seeking a portable 4K gaming rig.

The standout feature is its exceptional component compatibility. Unlike typical mini-ITX cases that force compromises, the C+Max accommodates 385mm graphics cards and bigger ATX power supplies, supporting flagship hardware like the RTX 5090 and Ryzen 9 9800X3D. The 240mm water cooling support with modular mounting brackets gives enthusiasts flexibility for advanced thermal solutions while keeping the form factor compact at just 13.3 inches tall.

Build quality is solid throughout. The aluminum chassis with SPCC inner frame and tempered glass side panel feels premium and weighs only 4.2kg, making it genuinely portable. Experienced builders consistently praise the construction quality and ease of assembly. The integrated carrying handle and elegant black finish make this case feel like a complete package rather than a stripped-down compromise.

Drawbacks are minimal but worth noting. The tempered glass panel is fragile during transport, requiring care when moving the case. Builders upgrading from large cases should expect a learning curve with cable routing due to space constraints. For the largest GPUs, an SFX-L power supply is recommended over standard ATX units.

The C+Max delivers excellent value for serious gamers and content creators who need portability without sacrificing performance. At 4.7 out of 5 stars with consistently positive reviews, this case proves that compact doesn't mean compromised.

Form Factor: Micro-ATX compact desktop case
Dimensions: 15.5 inches (D) x 7.3 inches (W) x 13.3 inches (H)
Weight: 4.2kg
Material: Aluminum, Alloy Steel, Tempered Glass

Component Support: Max GPU length 385mm, 240mm water cooling radiator, standard ATX 14cm power supply mounting (back mount)
Storage: 1 internal bay supporting 3.5-inch HDD or 120mm fan
Cooling: Supports air and liquid cooling, flexible mounting bracket
I/O: 2x USB 3.0 ports

Color: Elegant Black
Model: C+MAX (ASIN: B0CW5LWL3F)
Manufacturer: Mechanic Master