Black Friday is one of the few times a year when premium PC cases drop to genuinely competitive prices. Whether you are planning a fresh build around a high-end GPU or finally upgrading that cramped old chassis, the right case shapes your entire experience, from airflow to cable management to the view through that tempered glass panel.
This guide covers ten of the strongest Black Friday PC case deals available right now, spanning mid-tower and micro-ATX form factors, ARGB-heavy showpieces, and clean airflow-focused designs. If you want a broader look at glass-panel options year-round, our roundup of the best PC cases with glass panels is a solid companion read.
Quick answer
This guide compares 10 picks, with Lian Li V100 ATX Mid-Tower PC Case with 4 ARGB Fans ranked first. NZXT H5 Flow Compact ATX Mid-Tower PC Case with Mesh has the most customer reviews.
For shoppers wanting a case that looks finished right out of the box, the four internal bays give room to grow storage without a rebuild, while built-in RGB fans and a dust filter mean less time fussing with airflow and cleaning schedules. The bottom-mounted PSU keeps cabling tidy, a small detail that matters on a holiday build day.
Pros
- Four ARGB fans and LED strip pre-installed, no extra cooling purchase needed
- Supports GPUs to 420mm, 360mm radiators, coolers to 178mm
- Tool-less side panels for effortless building
- Rear cable routing and spacious PSU compartment for clean internals
Cons
- Open glass design offers minimal sound dampening
- Requires regular cleaning to keep panels and filters looking sharp
If you're hunting Black Friday case deals to build a rig that actually turns heads, the Lian Li V100 belongs on your shortlist. It skips the usual case shopping headache since it ships with four ARGB fans and an integrated LED strip already installed, meaning your discount stretches further because you're not buying cooling separately. The panoramic tempered glass panels give it a showcase look that suits gaming setups and streaming desks alike, and the internals back that up with room for GPUs up to 420mm, 360mm radiators, and CPU coolers up to 178mm. Cable routing runs cleanly through the rear with a generous PSU compartment, so the finished build looks tidy rather than cluttered. Construction mixes tempered glass, stainless steel, and plastic, and tool-less panels make the build itself painless. For a Black Friday buy, it hits a sweet spot: you get four fans, RGB lighting, and airflow headroom bundled into one purchase instead of piecing it together. Just know the open glass design trades some acoustic dampening for that visual payoff.
Form Factor: Mid-Tower ATX
Motherboard Support: ATX, Micro-ATX, Mini-ITX
GPU Clearance: Up to 420mm
CPU Cooler Height: Up to 178mm
Radiator Support: Top radiator up to 360mm
Fan Configuration: Supports up to nine 120mm fans
Pre-Installed Fans: 4x 120mm PWM ARGB fans
Fan Speed: 1800 RPM max
Airflow: 61.47-60.4 CFM
Air Pressure: 2.54-2.17 mm-H2O
Noise Level: 26.5-30.8 dBA
Bearing Type: Hydraulic
Lighting: Integrated 26-LED ARGB strip with full spectrum color control and daisy-chain connectivity
Materials: Tempered Glass, Stainless Steel, Plastic
Internal Bays: 4
Dust Filters: Yes
Weight: 8200g
Warranty: 1 Year
Buyers focused on straightforward reliability over flash will appreciate the rear-mounted PSU layout, a classic approach that simplifies cable routing for first-time builders. With two USB 3.0 ports up front, it covers everyday peripheral needs without overcomplicating the case, making it a sensible pick for a no-fuss ATX build this Black Friday.
Pros
- BTF hidden connector routing keeps the front panel clutter-free
- Dual tempered glass panels with frameless design
- 8-degree angled base improves airflow and ARGB visibility
- Supports 360mm AIO coolers with ample clearance
Cons
- HDD cage limited to 2 mechanical drives
- Core configuration needs additional case fans for full setup
Among Black Friday PC case deals, the ASUS A31 stands out for builders who want a genuinely different cable management experience, not just a discount on glass panels. Its BTF hidden connector system routes modular cables behind the motherboard, so the front view stays completely clutter free without extra effort on your part. Paired with dual tempered glass panels and a frameless design, the case creates a panoramic view of your components that feels premium for a mid-tower. The 8-degree angled base isn't just for looks either, it improves airflow and makes ARGB lighting pop. Build quality is solid thanks to the alloy steel frame, and thermal performance holds up well with support for 360mm AIO coolers and multiple fan mounts. Included cable ties make achieving that clean look straightforward even for less experienced builders. If you're comparing case deals this Black Friday, this one is worth picking specifically for the BTF routing, since it's not a common feature at this tier and changes how much cleanup work you'll actually do.
Form Factor: ATX Mid-Tower
Motherboard Support: ATX, Micro-ATX, Mini-ITX
Cooling Support: Up to 360mm AIO coolers with 80mm clearance
GPU Compatibility: RTX 5090/4090 and equivalent length cards
Storage: 2x 3.5-inch HDD bays, multiple SSD mounting locations
Ports: 2x USB 3.0, USB-C ready
Connectivity: BTF hidden connector design with behind-motherboard cable routing
PSU Mounting: Rear mount (ATX standard)
Fans Included: Mounting points for multiple configurations
Materials: Alloy steel frame, tempered glass panels, reinforced plastic components
Dimensions: 17.13 inches deep, 9.37 inches wide, 20.12 inches high
Weight: 18.1 pounds
Features: Dual-sided tempered glass, frameless design, 8-degree angled base, ARGB-ready, easy dust filters
Warranty: 2-year manufacturer coverage
This suits builders using or planning to use BTF-style motherboards, or anyone who wants pristine cable presentation without fuss. It's a strong pick for gaming and content creation builds where the front glass view matters. Skip it if you need more than 2 mechanical HDD bays for a storage-heavy setup, or if you expect a full fan lineup out of the box, since you'll likely want to budget for additional case fans.
Shoppers who want fans handled from day one will appreciate the four pre-installed units covering both air and water cooling setups, so there's no scrambling to add cooling later. The 270-degree tempered glass and Type-C front port also suit anyone who wants a modern look with quick charging access built in.
Pros
- Four 120mm fans pre-installed at no extra cost
- Dual 270-degree tempered glass for wide interior visibility
- Supports up to 410mm GPUs and 360mm radiators
- Dual-chamber layout isolates PSU for better airflow focus
Cons
- Large and deep, needs dedicated desk space
- Some reports of missing standoff holes for Micro-ATX builds
If your Black Friday case search is about getting maximum cooling headroom and screen presence without committing to a fully lit-up RGB build, the MUSETEX Y6 fits that gap. It ships with four 120mm fans already mounted, so you're not adding fan costs on top of whatever else you're buying during the sale. The dual 270-degree tempered glass panels give a wide view of the interior, and the dual-chamber layout keeps the power supply in its own ventilation zone so the front intakes and rear exhaust stay focused on CPU and GPU temperatures. It supports radiators up to 360mm and up to nine total fans, which is useful if you're planning to add liquid cooling in a later deal cycle rather than all at once. Graphics cards up to 410mm and CPU coolers up to 160mm fit comfortably, and tool-free panels plus included ties and screws make it easier to get through the build on a busy sale weekend without extra hardware runs.
Case Type: Mid Tower ATX
Motherboard Support: ATX, Micro-ATX, Mini-ITX
Cooling Capacity: CPU cooler up to 160mm, GPU up to 410mm, Radiator up to 360mm, PSU up to 230mm
Pre-Installed Fans: 4x 120mm (3 reverse on side, 1 forward on rear, non-LED)
I/O Ports: 1x USB 3.0, 1x USB 2.0, 1x Type-C, Audio, Microphone
Materials: Metal, Plastic, Tempered Glass
Dimensions: 16.73"D x 10.83"W x 15.67"H
Weight: 13.1 lbs
Color: Black Matte
Warranty: 10 Years
Buy this if you want a spacious, cooling-focused case with glass panels but don't need RGB lighting baked in. It's a good match for builders planning future liquid cooling upgrades. Skip it if desk space is tight, since it's deep and heavier than typical mid-towers, or if you're using a Micro-ATX board and want to avoid any risk of standoff hole inconsistencies.
High airflow seekers will appreciate that this case leans into ventilation with three ARGB PWM fans included, cutting down on thermal throttling during long gaming sessions. Seven expansion slots give room for multi-card setups or added peripherals, making it a fit for someone building a performance-first ATX rig without extra fan purchases.
Pros
- Fits 360mm radiators and 40-series GPUs in a mid-tower footprint
- Three ARGB fans pre-installed in a sensible airflow layout
- Dual tempered glass panels with a distinctive wood-grain I/O
- Three-stage dust filtration on top, bottom, and side
Cons
- Large PSUs and multiple drives need careful arrangement
- Heavier and roomier than typical mid-towers, so desk space matters
Black Friday is prime time to lock in a case that won't need replacing when you upgrade your GPU next. The MONTECH XR earns its spot on this list because it punches well above its mid-tower size, fitting 360mm radiators up front and current-gen 40-series graphics cards without the usual compact-case compromises. That kind of headroom matters when you're buying now to build later. The three pre-installed ARGB fans are already arranged for real airflow (reverse-blade on the sides, standard at the rear) so you're not starting from zero, and the mounting points support up to nine fans if you want to go further. Dual tempered glass panels and a wood-grain I/O trim give it a finished look rather than a budget one. Three-stage dust filtration across top, bottom, and side panels helps keep maintenance low. The tradeoff is planning your PSU and drive layout carefully in the compact interior, and clearing enough desk space for its footprint and 14.5-pound weight. For a deal-driven pickup, it covers a lot of ground.
Case and Dimensions
Case Type: Mid Tower
Dimensions: 17.1 inches deep x 9 inches wide x 17.7 inches high
Weight: 14.5 pounds
Material: Tempered Glass (dual panels)
Motherboard Support: ATX, Micro-ATX, Mini-ATX
Cooling and Fans
Pre-installed Fans: 3 (2 reverse-blade side fans, 1 rear fan)
Fan Size: 120mm
Maximum Fan Speed: 1500 RPM
Total Fan Support: Up to 9 fans
Radiator Support: 360mm at top
GPU Clearance: Up to 420mm
Connectivity and Ports
USB 3.0 Ports: 2
USB 2.0 Ports: 2
USB-C: Yes
Total Expansion Slots: 7
Internal Bays: 3 (3.5 inch)
Power Supply: Bottom mount (750W maximum)
Additional Features
Dust Filters: Top, bottom, and side panels (magnetic)
Fan Lighting: Multi-color ARGB
I/O Interface: Mature wood-grain design
Warranty: 1 year
Buy this if you want a mid-tower that can handle high-end components now and still leave room to grow, especially if a 360mm radiator or a 40-series GPU is part of the plan. It also suits anyone who wants a case that looks premium out of the box. Skip it if you need to fit a large PSU alongside multiple drives without careful layout planning, or if desk space is genuinely tight.
For builders prioritizing airflow over looks, the compact ATX mid-tower frame supports both Micro-ATX and ATX boards, giving room to adjust plans. Seven expansion slots leave space for future GPU or card upgrades, making this a practical choice for someone who wants a flow-focused case that won't box them into one configuration.
Pros
- Compact mid-tower fits ATX and Micro-ATX boards
- Mesh front, top, and side panels for strong airflow
- Two 120mm fans pre-installed
- Supports 360mm front and 240mm top radiators
Cons
- Only one 3.5-inch drive bay by default
- Mesh design leaves rear cabling visible if not routed carefully
For shoppers scanning Black Friday case deals who don't want to gamble on an oversized or gimmicky case, the NZXT H5 Flow is the safer, practical pick. It's compact enough to fit tighter desk setups while still taking full ATX boards, which matters if this sale is your one chance to lock in a case before prices creep back up. The airflow-first design, mesh front, top, and side panels plus a perforated PSU shroud, means you're not paying for cooling promises that don't show up in practice. Two 120mm fans are already installed, and the case supports up to a 360mm front radiator or 240mm top radiator if you want to add liquid cooling later with future deals. The tempered glass panel still lets you show off the build without turning the whole case into a fishbowl. Straightforward assembly makes it a good fit if you're building for the first time during a sale rush and don't want a steep learning curve on top of a new GPU or motherboard.
Case Type: Compact ATX Mid-Tower
Motherboard Support: ATX, Micro-ATX, Mini-ITX, E-ATX compatible
Dimensions: 16.93in W x 18.31in H x 8.86in D
Weight: 8 kg
Material: Metal with tempered glass panel
Cooling Support: Front 360mm radiator, top 240mm radiator
Pre-installed Fans: Two 120mm Quiet Airflow fans (front intake, rear exhaust)
Fan Size Support: 120mm standard
Power Supply: Bottom mount
Internal Bays: 4 total
Drive Support: One 3.5-inch bay, two 2.5-inch bays
I/O Ports: Two USB 2.0, two USB 3.0
Expansion Slots: 7 total
Cable Management: Wide channels, hooks, and straps included
Warranty: 2-year manufacturer warranty
Buy this if you want a dependable, well-ventilated case at a smaller footprint and don't need flashy RGB. It suits first-time builders and anyone prioritizing airflow over looks. Skip it if you need multiple 3.5-inch drive bays out of the box, or if visible rear cabling through the mesh panels would bother you without extra cable management effort.
Anyone building a compact but expandable rig will like that this case supports both Mini ITX and Extended ATX boards, giving flexibility if plans change later. The panoramic glass paired with built-in RGB fans and a dust filter suits someone who wants their components on display without sacrificing basic airflow upkeep.
Pros
- Supports Mini-ITX through EATX, including reverse-connector motherboards
- Three pre-installed RS120-R ARGB fans included
- GPU anti-sag arm and magnetic dust filters on three sides
- Exceptional cable management with rear storage area
Cons
- Nearly 20 inches deep, requiring dedicated space
- No dedicated 3.5-inch HDD bays for storage-heavy builds
For shoppers scanning Black Friday case deals who want flexibility across build types, the CORSAIR 3500X RS covers a wide range, supporting everything from compact Mini-ITX to expansive EATX motherboards, including reverse-connector boards like ASUS BTF, MSI Project Zero, and Gigabyte Project Stealth. That range makes it a safer pick if you're not settled on final component sizing yet. It arrives with three pre-installed RS120-R ARGB fans and wraparound tempered glass, giving you a head start on both cooling and looks without buying extras. There's room for large graphics cards, tower coolers, and radiators up to 360mm, and cable management is genuinely strong with numerous routing holes and a rear storage area that keeps the interior view clean. A GPU anti-sag arm protects your card, and magnetic dust filters on front, side, and top keep things clean without hurting airflow. The tradeoff for all that capability is size, at nearly 20 inches deep it needs real desk or floor space, so measure before you commit to this deal.
This case supports a broad range of motherboard form factors, from Mini-ITX compact builds to Extended ATX high-end platforms. Cooling capacity is impressive with support for up to 10x 120mm fans across side, roof, and PSU mounting points, allowing flexible thermal configurations. The case accommodates radiators up to 360mm, making it suitable for both air and all-in-one liquid cooling solutions.
The CORSAIR 3500X is compatible with the latest reverse-connection motherboards including ASUS BTF, MSI Project Zero, and Gigabyte Project Stealth, enabling cable-free interior builds for an exceptionally clean aesthetic. Storage flexibility includes multiple drive mounting options, though traditional 3.5-inch hard drive bays are limited. Front connectivity includes two USB 3.0 ports plus standard audio connectors for convenient access.
Model: CORSAIR 3500X RS-R ARGB (CC-9011322-WW). Case type: Mid-tower. Supported motherboards: Mini-ITX to Extended ATX. Dimensions: 18.11W x 19.92D x 9.45H inches, weighing 9.02 kg. Material: Tempered glass front and side panels with metal chassis. Power supply: Bottom-mounted. Includes 3x RS120-R ARGB fans with simple +5V motherboard header control.
Cooling capacity: 10x 120mm fan mounting points, supports radiators up to 360mm. Connectivity: 2x USB 3.0 ports. Features include removable glass panels, magnetic dust filters, GPU anti-sag stabilization arm, double-shot cable grommets, and rear cable storage. Warranty: 2-year manufacturer coverage. Best Sellers Rank: #13 in Computer Cases.
Builders chasing a strong visual centerpiece will find seven pre-installed ARGB fans deliver both cooling and presence without needing separate purchases. Dual tempered glass panels show off the build from two angles, and the Type-C port keeps modern peripherals connected, making this fit for anyone wanting a statement gaming rig this Black Friday.
Pros
- 7 ARGB fans pre-installed, no separate fan purchase needed
- 270-degree dual tempered glass for full component visibility
- Supports 360mm radiators and 15.7-inch GPUs
- Front Type-C and dual USB 3.0 for modern connectivity
Cons
- RGB control depends on motherboard software, not standalone
- Limited hard drive bays for storage-heavy builds
If you're hunting Black Friday case deals specifically to upgrade your visual setup, the MUSETEX K2 earns its spot by doing the heavy lifting before you even plug in a fan controller. Seven PWM ARGB fans come pre-installed, which on a normal sale weekend saves you a separate fan bundle purchase. The 270-degree dual tempered glass panels give a showroom look from nearly any desk angle, ideal if this deal is going toward a build meant to be seen, not tucked under a desk. It handles ATX, Micro-ATX, and Mini-ITX boards, GPUs up to 15.7 inches, and 360mm radiators, so it scales with whatever other components you pick up during the sale. Front Type-C plus dual USB 3.0 rounds out the connectivity. The metal frame and partitioned interior keep cable routing manageable. For a deal-focused buyer trying to consolidate fans, aesthetics, and cooling into one purchase, this case bundles a lot of value into a single line item.
Case Dimensions: 16.73 inches (D) x 8.35 inches (W) x 18.5 inches (H), weighing 15 pounds
Motherboard Support: ATX, Micro-ATX, Mini-ITX
Cooling: 7 pre-installed 120x120x25mm PWM ARGB fans (600-1300 RPM, 24.72 CFM max airflow, 20.8dB noise level). Expandable to 10 total fans.
Component Compatibility: GPU up to 400mm (15.7 inches), CPU cooler up to 165mm (6.5 inches), top-mounted liquid cooler up to 360mm (14.2 inches), PSU up to 140-180mm with or without hard drive cage
Front Panel I/O: 1x USB Type-C, 2x USB 3.0, microphone and audio jacks, power and restart buttons
Storage: 8 internal bays supporting 3.5-inch hard drives
Materials: Metal frame, plastic accents, tempered glass front and side panels
Additional Features: Dust filters, RGB lighting with motherboard control, bottom-mounted power supply
Warranty: 10-year manufacturer warranty
Buy this if you're using Black Friday to build or upgrade a showcase gaming rig and want fans included rather than bought separately. Skip it if you need more than 8 internal bays for heavy storage, or if you'd rather control RGB independently of your motherboard software. Also skip if a quiet, low-fan-noise setup matters more to you than visual impact.
Those working with a smaller Micro-ATX board but still wanting serious cooling headroom will value support for up to a 280mm radiator alongside three included ARGB fans. Dual tempered glass panels on the front and side make this suited to a compact build that still wants to show off water cooling components.
Pros
- Three 120mm ARGB fans included, expandable up to seven total
- Dual tempered glass panels on front and side
- Supports liquid cooling radiators up to 280mm
- Roomy cable management despite the compact micro-ATX size
Cons
- No built-in RGB controller, needs a compatible motherboard header
- Best aesthetics come with slimmer micro-ATX boards
If this year's Black Friday build is going small without going boring, the Thermaltake View 170 TG ARGB deserves a look. It's a micro-ATX case aimed squarely at desk setups and space-constrained rooms, but it doesn't skip the visual payoff: front and side tempered glass panels show off the build from two angles instead of one. Three included 120mm ARGB fans sweeten the deal further, since that's hardware you'd otherwise buy separately, and the case supports up to seven fans total for those who want more. Cooling flexibility extends to liquid setups too, with room for radiators up to 280mm. Metal construction and a surprisingly roomy interior for cable routing help the build look clean once it's together. The main thing to know before buying is that RGB lighting control depends on a compatible motherboard header, since there's no built-in controller. For a Black Friday pickup where every included extra counts toward value, the bundled fans and dual glass panels make this one worth comparing against pricier alternatives.
Case Type: Micro-ATX Mini Tower
Dimensions: 438 x 212 x 377.5mm (17.24 x 8.35 x 14.86 inches)
Weight: 6.35kg / 14 lbs
Motherboard Support: Micro-ATX (up to 9.6x9.6 inches) and Mini-ITX (up to 6.7x6.7 inches)
Cooling: Includes 3x 120mm ARGB Lite Fans (1000 RPM, 22.3 dBA)
Radiator Support: Top mount up to 280mm/240mm, rear mount 120mm
Fan Expansion: Up to 7x 120mm fans total
Storage: 1x 3.5 inch HDD bay, 2x 2.5 inch SSD bays
GPU Clearance: Up to 340mm length
CPU Cooler Clearance: Up to 160mm height
PSU Clearance: Up to 180mm length
Power Supply: Standard PS2 mounting (bottom mounted)
Expansion Slots: 4 total
I/O Ports: 2x USB 3.0, 1x HD Audio
Warranty: 3-year manufacturer warranty
Thermaltake View 380 TG ARGB Mid Tower Case with 4
Pros
- Four 120 mm ARGB fans included
- Dual tempered-glass display panels
- Dual-chamber cable management layout
- Supports air and water cooling
Cons
- Limited drive capacity
- Only one USB 3.0 port
For a Black Friday PC case shortlist, the View 380 TG ARGB earns attention by combining a display-focused layout with cooling hardware already included. Its front and side tempered-glass panels put installed components and lighting on view, while the dual-chamber arrangement keeps the power supply and cables out of the main presentation area. Four 120 mm ARGB fans are included, so the case begins with both airflow equipment and configurable illumination. The lighting can synchronize with ASUS, GIGABYTE, MSI, and ASRock software. The mid-tower supports air or water cooling and includes dust filters, making it relevant to a gaming or enthusiast build that needs visual impact without abandoning thermal planning. Its seven expansion slots add room for system configuration, and the rear-mounted power supply supports the tidy internal separation. It also supports hidden-connector motherboards, a useful feature for builders aiming to reduce visible cabling. Storage is limited to one 3.5-inch bay and two 2.5-inch positions, so it is better suited to SSD-forward builds than drive-heavy systems. A three-year warranty provides additional coverage.
The View 380 TG ARGB is engineered for maximum thermal flexibility. It supports up to 10 fans total across top, front, rear, and bottom mounting points, plus dual radiators (360mm on top and 280mm on the right side, or alternative configurations). This configuration rivals cases twice the price and enables expert builders to optimize airflow for their specific components.
The four included 120mm ARGB Lite fans operate at 1000 RPM with just 22.3 dBA noise output, making them suitable for silent builds when used conservatively. Users report excellent real-world cooling performance even with multi-radiator water cooling setups, with some systems running 11 total fans while remaining quiet. The dual-chamber design naturally separates intake and exhaust paths, improving thermal efficiency compared to single-chamber alternatives.
Air clearances are generous: CPU coolers up to 160mm fit without interference, and the 415mm GPU length support accommodates modern high-end graphics cards. The PSU mounting in the rear chamber keeps heat away from components, further improving thermal performance.
Buy the View 380 TG ARGB if your Black Friday case search centers on a clean-looking gaming PC with visible components, coordinated RGB lighting, and room for either air or water cooling. It makes particular sense for builders who want to hide the power supply and much of the cable clutter in a separate chamber, or who plan to use a hidden-connector motherboard. Skip it if you need substantial internal drive capacity, since it has space for only one 3.5-inch drive and two 2.5-inch drives.
Pros
- Exceptional value with six high-performance ARGB fans already installed and ready to run
- Dual-chamber design delivers superior thermal performance and clean cable routing
- Large tempered glass panel displays your components beautifully with full RGB control
- Versatile cooling support handles both air and liquid cooling setups up to 360mm radiators
- Ample internal space accommodates high-end graphics cards and tall CPU coolers
Cons
- Fan cable management becomes complex with six fans requiring individual header connections
- Limited information available on noise levels under load despite high fan count
The FOIFKIN F1 is a mid-tower ATX case designed for gaming enthusiasts and content creators who want excellent cooling performance without overspending. Its standout feature is the inclusion of six pre-installed 120mm ARGB PWM fans, eliminating the need for additional fan purchases and delivering immediate thermal benefits right out of the box.
The dual-chamber design separates your GPU and motherboard from the power supply and cable management area. This clever layout significantly improves airflow efficiency by preventing hot air recirculation and gives you ample space to route cables away from components. The case supports 360mm liquid coolers on top and 360/280/240/120mm configurations, making it equally suited for custom loop builders and air cooling enthusiasts with tall tower coolers up to 170cm.
Build quality is solid, featuring full tempered glass on the front panel that showcases your components and RGB lighting. The metal and plastic construction feels durable, and the case offers practical features like a USB Type-C 3.0 port, dust filters, and a convenient power button with restart function. Internal dimensions accommodate full-size GPUs up to 400mm, multiple storage drives, and PSUs up to 200mm, giving you flexibility in component selection.
The main consideration is managing six fan cables across your motherboard headers, though this is a minor trade-off for the benefit of pre-installed fans. Real-world reviews confirm the case delivers on its promise of superior thermals and clean aesthetics, making it an excellent choice for builders seeking value and performance.
The FOIFKIN F1 represents smart engineering and thoughtful design at an accessible price point. If you prioritize cooling performance, cable management, and visual appeal in your build, this case delivers on all fronts and earns a strong recommendation.
Case Design: Dual-chamber mid-tower with ATX, M-ATX, and ITX motherboard support. Dimensions: 430 x 230 x 490mm (16.9in x 9.06in x 19.2in).
Cooling: Six pre-installed 120mm ARGB PWM fans (5x reverse intake, 1x forward exhaust). Supports 360mm radiators on top. Air coolers up to 170cm tall. Compatible with 360/280/240/120mm radiators.
Storage and Components: Accommodates GPUs up to 400mm. PSUs up to 200mm. One 3.5-inch HDD bay plus three 2.5-inch SSD bays. Seven total expansion slots. Supports full ATX power supplies.
I/O Ports: One USB Type-C 3.0 port, one USB 3.0 port, two USB 2.0 ports, microphone and audio connectors, LED power button, power button, and restart button.
Materials: Metal body, plastic trim, and full tempered glass front panel. Includes dust filters. ARGB LED lighting system.
What to Look for in a Black Friday PC Case Deal
Airflow Configuration
Airflow is the single most important factor in long-term system health. Cases like the NZXT H5 Flow – Compact ATX Mid-Tower PC Case use ultra-fine mesh on the front, top, and side panels to maximize intake while filtering dust, which keeps thermals consistent under sustained loads.
Pay attention to fan mounting points and pre-installed fan counts. The MUSETEX ATX PC Case 7 PWM ARGB Fans Pre-Installed ships with seven adjustable-speed ARGB fans and supports up to ten total, giving you serious headroom for high-wattage builds without additional purchases.
Radiator and Cooler Compatibility
If you are running or planning a liquid cooling loop, radiator support is non-negotiable. Most cases on this list accommodate a 360mm radiator at the top or front, including the Thermaltake View 380 TG ARGB Black ATX Case and the MONTECH XR Panoramic High Airflow ATX PC Case, both of which also clear the 40-series GPU length requirements.
For smaller builds, the Thermaltake View 170 TG ARGB Black Micro-ATX Case supports up to a 280mm radiator in a compact micro-ATX footprint, making it a strong pick if desk space is a constraint. Pair your cooling setup well and your build will reward you with consistent performance. Our guide to quiet CPU coolers that stay silent under load can help you find the right match.
Cable Management and Build Experience
A clean build starts with good cable routing infrastructure. The ASUS A31 ATX Mid-Tower PC Case uses BTF hidden connector design to route all modular cables behind the motherboard tray, which delivers a clutter-free look without extra effort. Its 8-degree angled base also improves both airflow and viewing angles simultaneously.
The Lian Li V100-ATX Mid-Tower PC Case-Black-V100RX takes a different approach with tool-less side panel mounting and daisy-chain ARGB connectivity, reducing the number of headers you need to manage during the build process.
Form Factor and Motherboard Support
Most cases here support ATX, Micro-ATX, and Mini-ITX motherboards, but a few go further. The CORSAIR 3500X RS ARGB Panoramic Mid-Tower PC Case extends compatibility all the way to E-ATX, giving it the broadest motherboard support on this list. That flexibility matters if you are planning to reuse the case across future platform upgrades.
If you are building a compact rig, the Thermaltake View 170 is the only dedicated micro-ATX option here, while all others are standard mid-towers. Knowing your motherboard size before you buy saves a frustrating return later. Check our picks for the best PC cases under $100 if you want even more options in the budget mid-tower space.
Final Thoughts
These Black Friday PC case deals cover a wide range of builds, from clean airflow-first designs to full ARGB showcases, and nearly every option here punches above its typical price point during the sale season. For most mid-tower builders who want strong cooling alongside great visibility, the Lian Li V100-ATX Mid-Tower PC Case-Black-V100RX delivers an impressive out-of-the-box experience with four pre-installed ARGB fans and tool-less access. If you are working with a smaller footprint or a micro-ATX board, the Thermaltake View 170 TG ARGB Black Micro-ATX Case is the most capable compact option on this list, with dual tempered glass panels and solid radiator support in a tidy package.
Frequently Asked Questions
Are Black Friday PC case deals actually worth it in 2026?
Yes, Black Friday consistently produces some of the deepest discounts on PC cases across major brands. Mid-tower cases from brands like NZXT, Lian Li, and Corsair regularly see meaningful reductions during the sale window. It is one of the best times to upgrade your chassis without compromising on build quality or features.
What PC case size should I buy during a Black Friday sale?
Mid-tower ATX cases are the most versatile choice for most builders since they support the widest range of motherboards, coolers, and GPU lengths. If desk space is limited or you prefer a smaller footprint, a micro-ATX case like the Thermaltake View 170 is worth considering. Your motherboard size and cooler type should drive the final decision.
Do Black Friday PC cases come with fans already installed?
Many do, and it is one of the better value signals to look for during a sale. Cases like the FOIFKIN F1 ship with six pre-installed PWM ARGB fans, while the MUSETEX K2 includes seven. Pre-installed fans save you from buying them separately, which adds up quickly when you need three to seven units for proper airflow coverage. For guidance on pairing your case with the right cooling hardware, our quiet CPU cooler guide covers the top options available right now.
Can I fit a high-end GPU like an RTX 5090 in a Black Friday deal case?
Several cases on this list are built with flagship GPU clearance in mind. The ASUS A31 explicitly supports RTX 5090 and 4090 cards, while the Lian Li V100 accommodates GPUs up to 420mm in length. Always cross-reference your specific GPU dimensions against the case spec sheet before purchasing, especially with next-generation cards that tend to be longer and wider than previous generations.
Write Your Review
No reviews yet. Be the first to share your experience!